
        *****************************************************
        *                ATAPI CD-ROM drive                 *
        *****************************************************

        /////////////////////////////////////////////////////
        ///                                               ///
        ///  Documentation for Installer(DOS)  and        ///
        ///  Documentation for DeviceDriver (DOS, Win3.1) ///
        ///                                               ///
        ///             Making   date:   6/11/96          ///
        ///                                               ///
        ///  Copyright (C) 1995-1996                      ///
        ///  Matsushita-Kotobuki Electronics              ///
        ///       Industries Ltd.  All rights reserved.   ///
        ///  Documentation by Device Driver Project(DDP)  ///
        ///                                               ///
        /////////////////////////////////////////////////////

*******************************************************************************
(A)     PC DOS and MS-DOS installation Procedure
        (also supported for Windows 3.1 / Windows For Workgroup 3.11)
*******************************************************************************

1. Supportted CD-ROM drive:
        <ATAPI Interface CD-ROM>
	CR-572       (2x speed, tray loading type)
	CR-574       (4x speed, tray loading type)
	CR-581-J/B   (4x speed, tray loading type)
	CR-581-M     (4x speed, tray loading type)
	CR-582-xx    (6x speed, tray loading type)
	CR-583-xx    (8x speed, tray loading type)
	LK-MC579BP   (2x speed, tray loading type)
	LK-MC684B(P) (4x speed, tray loading type)
	LK-MC688B(P) (8x speed, tray loading type)

2. Installer file name:
        INSTALL.EXE (Version 1.12, common file for installation)
        INSTALL.DAT (installation's data file for ATAPI CD-ROM)

3. Discription for execution:
        Please type following from the DOS prompt:
                'A:'[return]  or 'B:'[return]
                'INSTALL' [return]


*******************************************************************************
(B)     PC DOS and MS-DOS device driver support
        (also supported for Windows 3.1 / Windows For Workgroup3.11)
*******************************************************************************

1. Supportted CD-ROM drive:
        <ATAPI Interface CD-ROM>
	CR-572       (2x speed, tray loading type)
	CR-574       (4x speed, tray loading type)
	CR-581-J/B   (4x speed, tray loading type)
	CR-581-M     (4x speed, tray loading type)
	CR-582-xx    (6x speed, tray loading type)
	CR-583-xx    (8x speed, tray loading type)
	LK-MC579BP   (2x speed, tray loading type)
	LK-MC684B(P) (4x speed, tray loading type)
	LK-MC688B(P) (8x speed, tray loading type)

2. Device Driver name:
        CR_ATAPI.SYS (Version 5.17p) for DOS
        WDCTRL.386   (Version 1.10 ) for 32bitDiskAccess=ON in Windows3.1

   !!! CAUTION !!!
        You can not use WDCTRL.386, when you use 32bitFileAccess=ON in WFW3.11.
        Please change 32bitFileAccess=ON to 32bitFileAccess=OFF.

3. Driver discription:
        [/D:xxxxxxx]    ---> Device name option
                ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000

        *[/P:nnn]       ---> ATAPI base I/O Port Address(hex) option
                ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /P:nnn
                nnn==1F0, 170, 1E8 or 168
                Primary connection:     nnn==1F0
                Secondary connection:   nnn==170
                Tertiary connection:    nnn==1E8(Sound Blaster IDE)
                Quaternary connection:  nnn==168(Sound Blaster IDE)

        *[/I:xx]        ---> Interrupt number option(IRQ=10,11,12,14,15)
                ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /I:xx
                Primary connection:     xx==14,10,11,12 or 15
                Secondary connection:   xx==15,10,11,12 or 14
                Tertiary connection:    xx==10,11,12,14 or 15
                Quaternary connection:  xx==10,11,12,14 or 15

        *[/W:n]         ---> Waiting value option
                When PC read data from CD-ROM drive, Driver insert waiting
                value into read cycle one by one.
                If you are using PC that are not supported IOCHRDY, please set
                this value(waiting value).
                ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /W:n
                n==0, 1, 2, ... 255
                        (For example 106usec/1 wait in 486DX2 66MHz)

        *[/Q]           ---> Non stop option
                Non stop(no message <A>bort, <R>etry) in initializing driver.
                ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /Q

        *[/E]           ---> Available error correction
                This option is available error correction for CD-G application.
                (Player for not including error correction)
                ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /E

        *[/B]           ---> No reset to CD-ROM Drive at boot configration
                This option make invalid that Device Driver reset to CD-ROM
                drive at boot sequence(in CONFIG.SYS).

        * : You can omit this option.


Trademarks and Copyrights
	PC DOS and OS/2 is a registered trademark
			of International Business Machines Corporation.
	MS-DOS, MS Windows and CD-ROM Extensions are trademarks
			or registered trademarks of Microsoft corporation.
	Sound Blaster and Video Blaster is a registered trademark
			of Creative Labs, Inc.
	All other product/brand names are trademarks or registered trademarks
			of their respective companies.
